AC-EX100-UHD

Comprehensive Features = Easier Implementation

• HDMI 2.0
  
• 4K60 4:2:0, 4K30 4:4:4, 3D Support
• HDR Support up to 4:2:2 12 Bit
• HDCP 2.2 & Earlier
• 100M (330ft) on 1080P, Up to 70m (230ft) on 4K (Cat6a)
• Bi Directional 48v PoE
• Ethernet hub & extension
• Audio Extraction on Tx (SPDIF, Balanced 2ch, PCM Only)
• EDID Management
• Compatible with HDBaseT displays, projectors, AVR’s

The AC-EX100-UHD is a 100m HDBaseT Tx/Rx with Bi-Directional Power, RS-232, IR, Ethernet, Audio Extraction and EDID Management..

The B.A.E features advanced functions like:

• Bi directional power – Power the transmitter from the receiver or the receiver from the transmitter, wither way only one power supply is required.
• Ethernet Hub – The transmitter and receivers both have Ethernet ports acting as a bi directional Ethernet hub.
• Audio Extraction – Extract audio from the transmitter with the on board SPDIF and Balanced 2-channel ports.
• EDID Management – Select from preloaded EDID’s so you can have total control over the active source.

Key benefits of using AC-EX100-UHD

1) ULTRA HIGH DEFINITION: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25FT. Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis. CAT-5E/6A cables are available widely and can be reworked easily by the installer or end-user.  Our AC-EX100-UHD supports 4K up to 70M (230ft) with crystal clear 4K Resolution & 100M (330ft) on 1080P

2) DISTANCE: By using AC-EX100-UHD, the transmission distance for HD 1080P is 100 meters (330ft) & 4K is up to 70 meters (230ft)

3) EDID MANAGEMENT: Control the source device with EDID management.  With the multitude of sources out there, this feature allows you to fix a known good EDID so the source device knows what to output…. every time.

4) CONTROL: IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa.  This allows unlimited flexibility when controlling sinks, and sources.  Control the rack or source and the display or sink over the same single wire.

5) BI DIRECTIONAL POWER: Ultra stable bi directional PoE allows you to really be flexible as you can choose where you want to power. Eliminate power supplies at the rack and power the Tx remotely from the display (Rx) end.

6) AUDIO EXTRACTION: The Tx on the pair had audio outputs for PCM audio – You have balanced 2-channel and SPDIF outputs to run audio directly into a local AVR or even more common, use the 2-channel audio to go into a distributed audio amplifier/matrix.

7) I-PASS: Plug you Control System emitter ports directly into the IR port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through, our unique VPC (Voltage Protection Circuit) allows you to do this without wear and tear on the sensitive electronics inside.